Universal Remote Control R7 - SPECS SHEET Manual do Utilizador descarregar pdf (Página 23)

Data Sheet ADP5585

Rev. C | Page 23 of 40

Bit(s) Bit Name Access Description

2 GPI_9_INT Read only 0 = no interrupt.

1 = interrupt due to GPI_9 (C2 pin). Cleared on read.

1 GPI_8_INT Read only 0 = no interrupt.

1 = interrupt due to GPI_8 (C1 pin). Cleared on read.

0 GPI_7_INT Read only 0 = no interrupt.

1 = interrupt due to GPI_7 (C0 pin). Cleared on read.

GPI_STATUS_A Register 0x15

Table 29. GPI_STATUS_A Bit Descriptions

Bit(s) Bit Name Access Description

7 to 6 N/A Reserved.

5 GPI_6_STAT Read only 0 = GPI_6 (R5 pin) is low.

1 = GPI_6 (R5 pin) is high.

4 GPI_5_STAT Read only 0 = GPI_5 (R4 pin) is low.

1 = GPI_5 (R4 pin) is high.

3 GPI_4_STAT Read only 0 = GPI_4 (R3 pin) is low.

1 = GPI_4 (R3 pin) is high.

2 GPI_3_STAT Read only 0 = GPI_3 (R2 pin) is low.

1 = GPI_3 (R2 pin) is high.

1 GPI_2_STAT Read only 0 = GPI_2 (R1 pin) is low.

1 = GPI_2 (R1 pin) is high.

0 GPI_1_STAT Read only 0 = GPI_1 (R0 pin) is low.

1 = GPI_1 (R0 pin) is high.

GPI_STATUS_B Register 0x16

Table 30. Register 0x16, GPI_STATUS_B Bit Descriptions

Bit(s) Bit Name Access Description

7 to 5 N/A Reserved.

GPI_11_STAT

Read only

0 = GPI_11 (C4 pin) is low.

1 = GPI_11 (C4 pin) is high.

3 GPI_10_STAT Read only 0 = GPI_10 (C3 pin) is low.

1 = GPI_10 (C3 pin) is high.

2 GPI_9_STAT Read only 0 = GPI_9 (C2 pin) is low.

1 = GPI_9 (C2 pin) is high.

1 GPI_8_STAT Read only 0 = GPI_8 (C1 pin) is low.

1 = GPI_8 (C1 pin) is high.

0 GPI_7_STAT Read only 0 = GPI_7 (C0 pin) is low.

1 = GPI_7 (C0 pin) is high.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Sem comentários

Universal Remote Control R7 - SPECS SHEET Manual do Utilizador Página 23